Chapter 29 port Commands
29.29 port pvc Commands
Use the following
ports.
29.29.1 port pvc delete Command
Syntax:
port pvc delete <slot-port-vpi/vci>
This command removes the specified PVC channel.
The following example removes the PVC on DSL port 5 on the line card in slot 2 with VPI 8 and VCI
35.
ras> port pvc delete 2-5-8/35
29.29.2 port pvc mvlan disable Command
Syntax:
port pvc mvlan disable <slot-port-vpi/vci>
This command deactivates multicast VLAN on the PVC. No multicast traffic will be sent to this PVC.
29.29.3 port pvc mvlan enable Command
Syntax:
port pvc mvlan enable <slot-port-vpi/vci>
This command enables multicast VLAN on the PVC.
29.29.4 port pvc set Command
Syntax:
port pvc set <slot-port-vpi/vci> <profile> <mux> <pvid> <priority>
where
<slot-port-
vpi/vci>
<profile>
<mux>
814
commands to configure PVCs (Permanent Virtual Circuits) on the DSL
port pvc
=
The slot and port(s) and VPI/VCI of the PVC.
=
The name of an ATM profile.
=
The type of encapsulation:
,
llc
vcmux
Management Switch Card User's Guide