ZyXEL Communications MSC1000G User Manual page 764

Chapter 29 port Commands
Table 364 port Commands (continued)
COMMAND
impedance
loop
ppvc delete
member
set
show
vlan
pvc delete
mvlan
pvlan
764
<slot-port>
<impedance>
<slot-port> 2600|3200
<slot-port-vpi/vci>
delete <slot-port-
vpi/vci> <vpi/vci>
set <slot-port-vpi/
vci> <vpi/vci>
<atmprofile>
<priority>
<slot-port-vpi/vci>
<mux> <pvid>
<priority>
<slot>|<slot-
port>|<slot-port-
vpi/vci> [detail]
<slot-port-vpi/vci>
<vid> <registration>
<tag>
<slot-port-vpi/vci>
disable <slot-port-
vpi/vci>
enable <slot-port-
vpi/vci>
delete
<slot-port-
vpi/vci> <etype>
set <slot-port-vpi/
vci> <etype> <vid>
<priority>
DESCRIPTION
Sets the impedance level on the specified
subscriber port.
impedance: 200ohm_680ohm_100nf,
220ohm_680ohm_100nf,
220ohm_820ohm_115nf,
220ohm_820ohm_120nf,
270ohm_750ohm_150nf,
300ohm_1000ohm_220nf,
370ohm_620ohm_310nf, 600ohm,
600ohm_1000nf, 900ohm, 900ohm_2160nf
and DEFVAL
Note: DEFVAL impedance is set at the impedance
of the country defined in the countrycode
command.
Applies to the MSC1024GC. Set the maximum loop
resistance in ohms.
2600: maximum loop resistance in ohms.
3200: maximum loop resistance in ohms.
Removes a priority-based PVC.
Removes a PVC channel from PPVC group.
Adds a priority-PVC into the group.
atmprofile: Specify the ATM profile using
profile atm commands.
Creates a priority-based PVC.
Displays runtime configured virtual channels.
Adds a PPVC channel to a VLAN.
Removes a PVC (Permanent Virtual Circuit).
Deactivates multicast VLAN on the PVC.
Activates the multicast VLAN in the PVC.
Deletes a protocol VLAN setting on a specified DSL
port.
Deletes a protocol VLAN on a specified DSL port.
Management Switch Card User's Guide
P
8
8
8
8
1
8
8
8
8
8
8