Chapter 4 Access Control List Screens
4.7.1 MAC Count Slot Screen
Click the slot number of an active line card in the MAC Count screen to display the screen shown
next.
Figure 40 MAC Count: Slot
The following table describes the labels in this screen.
Table 24 MAC Count: Slot
LABEL
UP
Copy
Port
Enable
Limited Number
of Learned MAC
Address
Select
100
DESCRIPTION
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select All to
select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the DSL port.
This field displays whether the MAC count limit is activated on the specified DSL port or
not (V for enabled, - for disabled).
This fields displays how many MAC addresses a port may dynamically learn.
Select the radio button of the port from which you want to copy settings.
Management Switch Card User's Guide