Show Voip H248 Termination State Command - ZyXEL Communications MSC1000G User Manual

This example shows the H.248 termination status of the H.248 interface 1's media card 1.
ras> show voip h248 termination info 1-1-1
media id
media ip
management inband ip : 172.23.19.236
management outband ip: 192.168.0.1
slot id
port count
state
Port 1

32.3.52 show voip h248 termination state Command

show voip h248 termination state *|<id>-<media>-<port> | <id> <name>
where
id
media
name
This command displays the specified card's H.248 termination status details.
This example shows the H.248 termination status of the H.248 interface 1's media card 1.
ras> show voip h248 termination state 1-1-1
media id
-------- --------------- ---- ----------- ----------
1
32.3.53 show voip sip serverstate Command
Syntax:
show voip sip serverstate <slot> [<proxysvr-ip> | <proxysvr-dn>]
where
<proxysvr-ip>
<proxysvr-dn>]
This command displays the status of SIP proxy server assigned to the line card in the specified slot.
Management Switch Card User's Guide
: 1
: 192.168.3.174
: 3
: 48
: registered
: A301
The number of the H.248 interface (1~16).
The number of the media card (1~27).
The name of an H.248 termination. Use up to 64 ASCii characters.
media ip port phone state line state
192.168.3.174 1
= The IP address of the SIP proxy server.
=
The domain address of the SIP proxy server.
on-hook idle
Chapter 32 show Commands
981