4.11 Packet Filter Slot Screen
Click the slot number of an active line card in the Packet Filter screen to display the screen shown
next.
Figure 46 Packet Filter: Slot
The following table describes the labels in this screen.
Table 30 Packet Filter: Slot
LABEL
UP
Copy
Slot
Management Switch Card User's Guide
DESCRIPTION
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select All to
select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the DSL port.
Chapter 4 Access Control List Screens
109