Ima Pvc Commands - ZyXEL Communications MSC1000G User Manual

24.5 ima pvc Commands

Syntax:
ima pvc set <slot-group-vpi/vci> <profile> <llc|vcmux> <pvid> <priority>
This command sets a PVC on an IMA line card.
The following example shows how to map specific single-tagged frames with a PVC on IMA group 1
of slot 2 using the following settings:
• Frames: tagged with VLAN ID 200 and priority 5
• The name of an ATM profile applied to this PVC: DEFVAL
• PVC: 0/34 and using the llc encapsulation method
ras> ima pvc set 2-1-0/34 DEFVAL llc 200 5
Syntax:
ima pvc show <slot|slot-group|slot-group-vpi/vci>
This command displays IMA PVC settings by the specified IMA slot, slot and IMA group, or slot and
IMA group with a channel.
The following example shows how to display all PVC settings on the IMA line card installed on slot 9.
The output shows 3 of 4 PVCs are tagged PVCs.
ras> ima pvc show 9
pvc
--------------- ----- ------ ----- ----- -------------------------------
9-2-0/33
9-4-0/33
9-6-111/312
9-6-234/334
24.6 ima dtpvc Commands
Syntax:
ima dtpvc set <slot-group-vpi/vci> <profile> <llc|vcmux> <svid> <spri> <cvid> <cpri>
where
svid
spri
Management Switch Card User's Guide
pvid pri mux
10 7 llc
10 7 llc
1233 0 vcmux untag DEFVAL
666 0 llc
=
The s-tag VLAN ID, 1~4094.
= The priority for the s-tag VLAN, 0~7.
tag profile
tag DEFVAL
tag DEFVAL
tag DEFVAL
Chapter 24 ima Commands
719