Command Privilege Levels - ZyXEL Communications MSC1000G User Manual

Chapter 18 Commands
Table 345 Common Command Notation
NOTATION
slot-port
pvid, vid
vpi/vci

18.5 Command Privilege Levels

Each command has an access privilege level that an administrator session is required to have in
order to use the command.
When the system uses a TACACS+ server to authenticate administrator logins, you automatically
have the lowest privilege level (1) when you first log in.
When the system uses its local database authenticate administrator logins, you automatically have
your account's assigned privilege level when you log in.
18.5.1 Command Privilege Levels with TACACS+
When your login to the commands is authenticated by a TACACS+ server, use the following
commands to modify your session's privilege level. The P column on the right indicates the
administrator privilege level needed to use the command.
Table 346 Command Privilege Levels with TACACS+
COMMAND
disable
enable <1~14>
password <1~14>
You can manage the privilege levels for login accounts by using vendor-specific attributes in an
external authentication server. See the User's Guide for more information. You cannot change the
privilege level of the admin account.
18.6 Saving Your Configuration
Use the following command to save your configuration when you are done with a configuration
session.
ras> config save
644
DESCRIPTION
This represents the number of an individual chassis slot where a line card is located and the
number of a port(s). You can specify a single port <1>, all ports <*> or a list of ports
<1,3,4>. You can also include a range of ports <1,5,6~10,11,12>.
This represents a VLAN identifier (VLAN ID). The range is [1.. 4094].
The VPI (Virtual Path Indicator) and VCI (Virtual Channel Indicator) of an individual PVC
(Permanent Virtual Circuit). The VPI setting can be 0 to 255. The VCI setting can be 32 to
65535 if the VPI is 0 or 1 to 65535 if the VPI is not 0.
<password>
DESCRIPTION
This reduces the session's privilege level to low.
Raises the command privilege level for this session in order
to access more commands.
Sets the password for raising the privilege level for a
management session in order to access more commands.
Management Switch Card User's Guide
P
1
1
1
4