Leds; Ports And Connections - ZyXEL Communications MSC1000G User Manual

Management switch card
Hide thumbs Also See for MSC1000G:
Table of Contents

Advertisement

Chapter 2 Hardware Connections

2.2 LEDs

Table 1 Management Switch Card LED Descriptions
LED
COLOR STATUS DESCRIPTION
PWR
Green
SYS
Green
ALM
Red
MGMT
Yellow
Green
The following LEDs apply to the SFP/XFP/SFP+ slots.
LNK
Green
1~4
ACT
Green
1~4
The following LEDs apply to the Gigabit ports.
1000/
Yellow
100
Green

2.3 Ports and Connections

Note: Install the MSC before you make the hardware connections. Refer to the IES-5000
Series or IES-5106M, IES-5112M, and IES-6000M User's Guide for installation
instructions.
56
On
The management switch card is installed and receiving power from the main
chassis.
Off
The management switch card is not receiving power from the main chassis.
Blinking
The system is initializing.
On
The management switch card is on and functioning properly.
Off
The management switch card is not receiving power, is not ready or has
malfunctioned.
On
An alarm has been detected on the MSC, the Integrated Ethernet Switch fan,
the MSC1000G's INPUT ALARM terminals, or the input alarm terminals of the
IES-6000M's alarm module. Examples of an alarm on the MSC are when the
MSC's voltage or temperature is outside of the normal range.
Off
The MSC has not detected an alarm on itself, the Integrated Ethernet Switch
fan, the MSC1000G's INPUT ALARM terminals, or the input alarm terminals of
the IES-6000M's alarm module.
Blinking
The port is transmitting/receiving to/from a 100 Mbps Ethernet network.
On
A 100 Mbps Ethernet link is up.
Off
The Ethernet link is down.
Blinking
The port is transmitting/receiving to/from a 10 Mbps Ethernet device.
On
A 10 Mbps Ethernet link is up.
Off
The Ethernet link is down.
On
A 1 Gbps or 10 Gbps Ethernet link is up.
Off
The Ethernet link is down.
Blinking
The system is transmitting/receiving Ethernet traffic.
Off
The system is not transmitting/receiving Ethernet traffic.
Blinking
The port is transmitting/receiving to/from a 100 Mbps Ethernet network.
On
A 100 Mbps Ethernet link is up.
Off
The Ethernet link is down.
Blinking
The port is transmitting/receiving to/from a 1000 Mbps (1 Gbps) Ethernet
device.
On
A 1000 Mbps (1 Gbps) Ethernet link is up.
Off
The Ethernet link is down.
Management Switch Card User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msc1024gMsc1224gMsc1024gbMsc1024gcMsc1224gb

Table of Contents