ZyXEL Communications MSC1000G User Manual page 68

Chapter 3 The Web Configurator
Table 3 Navigation Panel Links (continued)
LINK
SHDSL
ATM
Alarm ADSL
Alarm VDSL
Alarm VDSL2
Alarm SHDSL
Alarm E1
IGMP Filter
VoIP SIP
VoIP SIP
CALLSVC
VoIP DSP
VoIP H248
IPQoS
ACL
Rate Limit
Queue Rate
Limit
Dialplan
Statistics
ARP Table
DHCP
MAC Table
IGMP Status
IP Bridge
Online Users
Port Statistics
Dot3ad
VLAN
MSTP
IP
68
DESCRIPTION
This link takes you to a screen where you can configure SHDSL profiles.
This link takes you to a screen where you can configure ATM traffic profiles.
This link takes you to a screen where you can configure ADSL alarm profiles.
This link takes you to a screen where you can configure VDSL alarm profiles. Use these for
VLCs that follow the VDSL MIB as defined in ADSL Extension Line MIB (RFC 3440).
This link takes you to screens where you can configure VDSL2 alarm profiles, alarm line
profiles and alarm channel profiles. Use these for VLCs that follow the VDSL2 MIB (defined
in draft-ietf-adslmib-vdsl2-06).
This link takes you to a screen where you can configure SHDSL alarm profiles.
This link takes you to a screen where you can configure E1 alarm profiles.
This link takes you to a screen where you can configure IGMP filter profiles.
This link takes you to a screen where you can configure VoIP SIP filter profiles.
This link takes you to a screen where you can configure VoIP SIP CALLSVC
filter profiles.
This link takes you to a screen where you can configure VoIP DSP
filter profiles.
This link takes you to a screen where you can configure VoIP H248
filter profiles.
This link takes you to a screen where you can configure IPQoS (Quality-of-Service) profiles.
This link takes you to a screen where you can configure ACL (Access Control List) profiles
to have the system classify and perform actions on the upstream traffic.
This link takes you to a screen where you can configure Ethernet subscriber line rate limit
profiles.
This link takes you to a screen where you can configure VDSL2 and Ethernet subscriber line
per-queue rate limit profiles.
This link takes you to a screen where you can set up and manage the VoIP dial plan
profiles.
This link takes you to a screen where you can view the MAC address to IP address
resolution table.
This link takes you to a screen where you can view DHCP counters and DHCP snooping
information.
This link takes you to a screen where you can see the MAC addresses that the system has
dynamically learned.
This link takes you to a screen where you can view information collected by IGMP snooping
and/or IGMP proxy.
This link takes you to a screen where you can view IP bridge information.
This link takes you to a screen where you can view information about administrators that
are logged into the system.
This link takes you to screens where you can view port statistics and status. You can also
view RMON history information on the switch ports.
This link takes you to a screen where you can view the link aggregation status.
This link takes you to screens where you can view the VLAN settings and status.
This link takes you to screens where you can view the MSTP status and statistics.
This link takes you to a screen where you can view the port IP statistics.
Management Switch Card User's Guide