Log On; Log Off - GE Revolution CT User Manual

[Emergency Logon]
[Logon]
[Cancel]

2.2.2 Log On

If Access Controls is enabled, use the following procedure to log on to the system.
Logon window, enter your logon name.
1. From the
2. Enter your password.
NOTE: If you do not have a valid account, click [Emergency Logon]. The
Logon window displays. Logging on does not require an ID or password.
3. Click [Logon].

2.2.3 Log Off

If Access Controls is enabled, use the following procedure to log off from the system.
1. From the image monitor, click
Mode menu, click Shut Down , then Switch User .
2. From the
NOTE: Logging off does not prohibit other users from logging on. Log off is designed to
protect patient privacy. It is not intended to stop approved users from logging on.
When you log back on after a log off, the system returns to your last known state.
194
Launches the Emergency Logon window when Access Controls (EA3) is enabled. It does
not require an ID or password on your enterprise system.
Illustration 2: Emergency Logon window
Click to log on.
Quit the log on procedure.
.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Emergency
2 System Startup and Shutdown