Save An Image Screen; Cross-Reference Images On A Scout - GE Revolution CT User Manual

5.4 Save an image screen

Screen Save is an electronic photograph of an image. Screen Save saves everything that is on
the image in primary focus. This includes zoom, cursors, measurements, flip or annotation. You
can use Screen Save to save images when anatomy or pathology has been measured. The
screen saved images are listed on the patient list browser as series number 99, and called
SSave for the series type.
The images can be archived and networked. However, these images have image processing
restrictions, and any annotation on the image cannot be removed once the screen has been
saved.
NOTE: Screen Save images are not PPS aware. Images created in Reformat, 3D, and
Navigator are not PPS aware. Image types INPR is posted in the PPS column in the
browser even though PPS is not enabled.
1. From the viewport control panel, click [Film Tools].
2.
Click the [Save as Secondary Image]
series 98. You can also right click on the image, then click

5.5 Cross-reference images on a scout

Use this feature to view lines on the scout image representing previously scanned locations.
Command box, type xra <series number> <image set>: <interval>, where:
In the
•
series number is an appropriate series number to be cross-referenced
• image set is a consecutive group of image numbers within the series
Chapter 14 View Images
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
icon to save the displayed information to
Screen Save .
401