Enter Patient Id Or Accession Number With The Bar Code Reader; Modify The Patient Information Presets - GE Revolution CT User Manual

3.3.2.1 Enter patient ID or accession number with the bar code reader

1. From the scan monitor, click [+].
2. To populate the field on the
Patient ID or Accession Number bar codes on the patient requisition.
the
3. Enter any remaining patient information.
4. Select desired protocol(s) and begin the exam.

3.3.2.2 Modify the Patient Information presets

Use these procedures to modify the
presets are saved across software loads from the saved
1. From the image monitor, click
System Preferences .
2. Click
System Preferences window, click the Patient Data Entry tab.
3. From the
4. Click any of the preset fields or click [Add New] and type in the desired text field.
Referring Physician
•
• Radiologist
• Operator
Exam Description
•
• Contrast Oral
• Contrast IV
Referring Physician , Radiologist or Operator , enter the first name, last name or
NOTE: For
both.
NOTE: Selecting another
Change an item on the list
Preset fields window, select the item you want to change.
1. From the
2. Enter the new information in the text field.
3. Press <Enter>.
Add an item to the list
Preset fields window, click [Add New].
1. From the
2. Enter the new information in the text field.
3. Click [Save].
Delete an item from the list
Preset fields window, select the item you want to delete.
1. From the
254
Patient Information window, aim the bar code reader at either
Preset fields on the Patient Information window. The
.
Preferences tab will save the data entered.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
System State .
3 Exam Workflow