Image Flip Orientation For All Scan Types; Secondary Recon Parameters - GE Revolution CT User Manual

6.3.7 Image Flip Orientation for all scan types

Primary Recon collection.
1. Open the
Image Flip Orientation and choose the desired selection.
2. Click on
To flip or rotate the image so the image will be reconstructed in the orientation desired for
viewing, select one of the following options:
○
FLR (Flip Left Right)
○ FTB (Flip Top Bottom)
○
FLR / FTB (Flip Left Right / Flip Top Bottom)
The Image Flip Orientation option is turned off when software is delivered. A service
representative can enable it once you are sure that remote viewing stations display the flipped
and rotated images correctly.
Images are annotated with:
•
FI: LR
•
FI: TB
• FI: Rotate 180
All Image Flip Orientation annotations display on the left side of the image when prescribed in
recon.
NOTE: Image Flip Orientation and non-Image Flip Orientation images can not be mixed in the
same series.
NOTE: If Image Flip Orientation in Recon and Continuous Cursor are enabled on a system,
the RAS coordinates displayed on the left side of the image have the Image Flip
Orientation annotation intermixed with the RAS information. If Image Flip Orientation
was not applied to the image, there is a blank space in between the RAS information.

6.4 Secondary Recon Parameters

The system allows up to nine additional secondary reconstructions of your scan groups,
prescribed pre-scan, that use all or any portion of a group or across groups to change several of
the reconstruction parameters. You can prescribe more secondary reconstructions post-scan.
296
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
6 Recon Parameters