72
CAUTION
If the table is lowered with anything in the designated area below the table, the
table could be damaged along with the equipment or object under the table.
WARNING
TO PREVENT PINCHING OR CRUSHING OF THE PATIENT'S EXTREMITIES,
KEEP THE PATIENT'S HANDS AND FEET AWAY FROM THE EDGE OF THE
MOVING TABLE TOP/CRADLE AND ITS SURROUNDING EQUIPMENT, OR
BETWEEN TABLE BASE AND SIDE PANELS OF THE TABLE. TAKE SPECIAL
CARE WHEN POSITIONING PHYSICALLY LARGE PATIENTS.
WARNING
TO PREVENT PINCHING OR CRUSHING OF THE PATIENT, WATCH THE
PATIENT AND EQUIPMENT CAREFULLY AT ALL TIMES DURING TABLE
MOVEMENT. IF UNWANTED MOTION OCCURS OR MOTION DOES NOT
STOP, PRESS THE EMERGENCY STOP SWITCHES ON THE CONSOLE OR
GANTRY.
WARNING
THE HEAD HOLDER MAY CRACK, POSSIBLY INJURING THE PATIENT'S
HEAD OR NECK, IF THE PATIENT TRIES TO BRACE HIMSELF OR HERSELF
ON THE HEAD HOLDER DURING POSITIONING. THE HEAD HOLDER AND
CRADLE EXTENDER ARE ONLY DESIGNED TO SUPPORT 75 POUNDS (34
KG). ASK THE PATIENT TO MOVE UP INTO THE HEAD HOLDER OR
MANUALLY HELP THE PATIENT INTO POSITION.
CAUTION
Use of any cradle extension accessories such as the table extension, head
holder, coronal head holder, and phantom holder are not accounted for in the
table gantry interference matrix. Therefore, additional care needs to be taken to
closely monitor any table up/down, in/out or gantry tilt movement to avoid contact
of the extended accessory with the gantry.
Illustration 24: Table
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
9 Mechanical Safety
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated