Maintenance And Cleaning - GE Revolution CT User Manual

18 Maintenance and Cleaning

• To guarantee safe, reliable equipment performance, the site must be prepared according to
GE Healthcare requirements, as specified in the Pre-Installation Manual.
•
There are no user serviceable parts in this system. The product should be installed,
maintained, and serviced by qualified service personnel according to procedures laid down
in the product service manuals.
•
The system in whole or in part should not be modified in any way without prior written
approval by GE Healthcare.
•
Keep the equipment clean. Remove body fluids and/or IV spills to prevent a health risk and
damage to internal parts. Clean the equipment with any of the following approved cleaning
agents. Follow cleaning agent manufacturer instructions. Apply with cloth or supplied
cleaning agent wipes:
○
Warm water and soap mixture (mix 1 gallon of water with 0.5 teaspoon of dish washing
soap)
○
Common household bleach, diluted 10:1
○
Sani-cloth HB
•
Also, use dry cleaning for electronic components.
•
Do not clean the connectors on the cables for ECG, respiratory equipment, etc. If you need
to clean them contact GE Service.
•
Planned maintenance must be carried out regularly to ensure safe operation of the
equipment.
• For user maintenance of the system and performance tests, refer to the maintenance and
calibration information in the Technical Reference Manual.
Environmental Concerns
This symbol indicates that the waste of electrical and electronic equipment must not be
disposed of as unsorted municipal waste and must be collected separately. Please contact an
authorized representative of the manufacturer for information concerning the decommissioning
of your equipment.
Chapter 3 Safety
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
95