GE Revolution CT User Manual page 559

Edit Patient Data window, edit the text fields.
4. From the
○
Click the text you want to edit and enter your changes.
Exam Number field cannot be edited.
○ The
○ Edit Patient is not accessible if the exam is in use.
5. Click [Save] when you are satisfied with the changes and you have entered your initials in
Edited By field. A confirmation window opens.
the
6. At the confirmation window, click [Accept].
○ A percentage countdown menu displays until
Information Edit Log is updated.
○
It takes approximately two minutes to update a 100-image exam.
○
The original exam is replaced with the edited exam and is indicated by
description field. The number indicates how many times the exam has been edited.
Make a Patient Anonymous
Use this procedure to remove certain exam information. An Anonymous Patient can be created
by exam, series, or image. To set the annotation level to Full or Partial, see the
anonymize patient annotation level procedure.
1. From the File Manager, right-click on the exam and then select [Anonymize Patient].
2. Verify that there is enough disk space to create an anonymous patient exam.
A progress bar displays the process's status.
Install a SMPTE Pattern
Follow these steps to install a SMPTE pattern to view BRH or quality assurance images. Once
installed the images are in exam 1000, which can be selected from the Exam List. The patient
Name is listed as SMPTE.
1.
Click the Utilities icon
Service Desktop .
the
Image Quality tab.
2. Click the
Install SMPTE Image from the menu tree on the left of the window.
3. Click
Chapter 17 Data Management
on the image monitor, select
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Edit Patient is closed and the Patient
Service , then Service Tools to open
e+1 in the
Set the
559