Table of Contents
Advertisement
3 GE Approved Accessories
With each use, check all accessories for damage and remove them from service if damaged or
cracked. Use only GE approved equipment together with this system.
Table 1: GE Approved Accessories Types and Models
Type
Cardiac Trigger Monitor
Partial UPS
External Hard Drive
Bar Code Reader
Patient contrast injector:
For Enhanced Xtream Injector Option
•
Patient comfort and workflow accessories such as the cradle pad, cradle extender, patient
arm board, catheter bag holder, table tray, and IV pole attached to the cradle.
•
Patient positioning accessories including Axial and Coronal head holders, positioning straps,
and pads.
•
System quality assurance accessories including imaging phantoms and phantom holder.
Chapter 1 User Information
Direction 5480385-1EN, Revision 1
Manufacturer/Model
IVY 7800
IVY CTM-400
Eaton Powerware 9355-15-14GE
Seagate 2 TB USB 2.0/3.0
Honeywell 1300G
Honeywell 3800G
Nemoto Dual Shot Alpha (CiA425 Class IV)/GE 5328195
Nemoto Dual Shot GX (CiA425 Class IV)
Medrad ISI900 (for Stellant D) (Class IV)/GE 5335919
Revolution CT User Manual
39
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated