Delete A Protocol; Series Numbering - GE Revolution CT User Manual

9. Right-click in the protocol list area and select
10. Rename the protocol as needed.
a. Click the protocol.
b. Right-click and select
c. Click [OK].
Or
Click [Edit] to modify the protocol and save the new values.

2.10 Delete a protocol

Use this procedure to delete a protocol from your user defined protocol list. This keeps your
protocol list current by deleting any unnecessary protocols.
NOTE: Only protocols in the
1. From the image monitor, click
Protocol Management , then click Protocol Management again.
2. Click
CT Login authentication window, enter your Log On Name and Password.
3. From the
Protocol Selection window, select either the Adult or Pediatric protocol category.
4. From the
5. Click the desired anatomical body part to view that protocol list.
6. Select the protocol you want to delete.
7. Right-click and select
8. Click [Yes] to confirm the deletion.

2.11 Series Numbering

The system uses the following series numbering schemes:
System Condition
Primary Recons
Pre or post scan Secondary Recons
SmartPrep
Text Pages
(exam, series, roi)
Secondary Capture
Cardiac ECG trace per recon
Contrast Report
Dose SR
Dose SC
582
Rename to enter the New name .
Adult or Pediatric categories can be deleted.
Delete .
DMPR
Paste .
.
1–89
301-389
401-489
201-289
601-689
701-789
801-889
98
99
599
996
997
999
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Series Numbering
2 Protocols