Table of Contents
Advertisement
4.2 Collect Data with SPR Snap
Use this procedure to capture SPR information on the system.
NOTE:
Do not initiate an SPR Snap if the system is actively collecting data with X-ray on.
1.
From the image monitor, click
Utilities menu, click Troubleshooting , then SPR Snap .
2. From the
sprsnap window will open to indicate that SPR Snap is in progress.
The
3. When SPR Snap is finished, the
stored in the following system directory: usr/g/service/log, and can be retrieved be
your service representative. Note the directory location for future use.
Chapter 20 System Management
.
sprsnap window will close. The SPR information will be
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
633
Advertisement
Table of Contents
Troubleshooting
