Setting Up The His/Ris Refresh - GE Revolution CT User Manual

All patient names, patient IDs and exam descriptions that contain that character display both on
the Schedule and on the dropdown list below the search box.
The drop-down list indicates the field containing the characters, up to 5 entries for each field. If
there are more than 5, a link at the bottom of the category indicates how many more matches
were found, such as: "35 more". If the user clicks on that link, it searches only that field for those
entries and shows the matches in the schedule. For each additional character typed, the list of
patients is filtered. The search/filter ignores the case of any characters entered.

2.11 Setting up the HIS/RIS Refresh

You set how the schedule refreshes on the Refresh Setup window. Once set, the list is
refreshed the same way each time you select Refresh from HIS/RIS. You can also set the
schedule to update automatically.
1. From the scan monitor, click the
Refresh Setup from the Schedule dropdown menu.
2. Select
○ This System to pull the patient schedule for the scanner on which you are
Select
working.
This Modality to pull the patient schedule for all of the CT systems on the HIS/RIS
○ Select
connection.
○
Define the search parameters using the Date Range check boxes. For example, pull all
exams scheduled for the current day by clicking
○ All Modalities to pull the patient schedule for all of the systems on any modality
Select
(for example CT, MR, etc.) on the HIS/RIS connection. This is the default setting. Not
recommended. Depending on your site, this may be a very long list.
3. Enter values for the
Chapter 10 Patient Schedule
Illustration 8: HIS/RIS search results
Patient Schedule drawer.
Date Range .
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Today .
213