Scan Settings Window - GE Revolution CT User Manual

Anatomical Landmark Reference Point
Patient Orientation
Patient Position
Copy Forward
Auto Voice Language

3.2.3 Scan Settings window

Scan Settings window is an area on the Scan Setup window. Parameter fields that can be
The
modified are underlined. Additionally, parameter fields with small boxes next to them indicate
that a pop-up window can be opened to define more values.
NOTE: The
Chapter 11 Scan
Illustration 5: Patient Position area
Element
Choose a preset center point, or designate a center point with a two letter abbrevi‐
ation or 0. This should be set the same as your scout images.
Set the proper patient orientation and position.
Place the cursor on the head or feet of the patient and click to change the head-
first or feet-first patient orientation.
Place the cursor over the abdominal area or table base and click to rotate the pa‐
tient in 90° increments to change the patient position.
Select to copy Patient Orientation and Patient Position settings from the previously
scanned series.
Click to set the Auto Voice language for the exam.
Scan Settings window will change based on the scan type selected.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Description
247