Table of Contents
Advertisement
Table 15: Coverage Speed — Cardiac Axial
Element
Table Positions
Detector Coverage
Minimum Time Between Passes
Number of Passes
Scan Interval
Rotation Time
Total Exposure Time
Overlap Amount
Chapter 11 Scan
Illustration 15: Coverage Speed collection — Cardiac Axial
•
One (Single)
•
One or More (Multiple)
Use when the scan range is greater than 160 mm if using Smart Coverage or when
the fixed coverage scan range is greater than the detector coverage.
•
Smart Coverage (system adjusts to best coverage based on the start and end loca‐
tion prescribed)
•
40 mm
•
80 mm
•
120 mm
•
140 mm
•
160 mm
Equipment chapter; Detector Configuration section for more information.
Also see the
The time between rotations for the data acquisition when the interval is 0.
The number of rotations for the data acquisition at the same table position.
Determined by the system.
0.28 s, 0.35 s
Determined by the table positions, number of passes and phase ranges for each acquisi‐
tion part.
•
Minimum : Lowest dose
•
More : Better image quality
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Description
269
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated