Workflow; References - GE Revolution CT User Manual

1.8 Workflow

Table 8: Workflow terms
Generic description
Scheduled (but not yet scanned) patient list is called
Already scanned patient list is called
User comments or text added to an image is called
Filming tools are called
Data page summarizing scan parameters, CTDI
Sorting patient list

1.9 References

IEC 60601-2-44 ed3.0 (2009-02) Medical electrical equipment – Part 2-44: Particular
requirements for the basic safety and essential performance of X-ray equipment for computed
tomography.
Kalra, M. K. and S. Saini. 2006. Standardized nomenclature and description of CT scanning
techniques. Radiology 241, 657-660.
National Electrical Manufacturer's Organization. 2009. Digital Imaging and Communications in
Medicine (DICOM). (Downloadable from: www.nema.org)
RadLex Tree Browser (www.radlex.org)
Weber, N. M., C. L. Siegle, J. E. Miller, M. K. Hudson, J. M. Kofler, M. R. Bruesewitz, and C. H.
McCollough. How to be a "multi-lingual" CT technologist: understanding scan parameters from
different manufacturers' equipment. 2004 RSNA Annual Meeting poster (www.mayo.edu in
Research).
Weigold, W.G., et al. 2011. Standardized Medical Terminology for Cardiac Computed
Tomography: A Report of the Society of Cardiovascular Computed Tomography. Journal of
Cardiovascular Computed Tomography (downloadable from: www.scct.org in Documents).
Appendix D Lexicon
Direction 5480385-1EN, Revision 1
GE name
Patient Schedule
File Manager
User annotation
Not used on this system
and DLP Exam Text Page, Series
vol
Text Page, or Dose SC
Click column to sort
Revolution CT User Manual
687