Table of Contents
Advertisement
3.2 Equipment Warning Labels
The following Warning Labels are used on the equipment:
3.2.1 Laser Warning Labels
Illustration 1: Warning labels located at the bottom of the gantry cover (Reference 21CFR
Illustration 2: Labels on the front of the gantry (Reference 21CFR 1040.10 (h))
52
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
CAUTION
Laser Radiation
Do Not Stare into Beam
635, 670nm Laser Diode
1 Milliwatt Maximum Output
Class II Laser Product
CAUTION
LASER APERTURE
Do not stare into beam
1040.10 (g)(4))
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
3 Symbols and Warning Labels
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated