GE Revolution CT User Manual page 671

Tomography scanner
Table of Contents

Advertisement

Number English Operator Message
SmartmA, ODM and kV Assist unavailable due to patient
orientation/position mismatch. Scan a scout with the same
16
patient orientation/position or Manual mA and kV must be
set.
SmartmA, ODM, and kV Assist unavailable due to new
17
landmark. Scan a scout with the current landmark if appro‐
priate or Manual mA and kV must be set.
kV Assist mode has been enabled.
Verify kV, Noise Index, Min mA/Max mA, or kV, Manual mA
18
values and resultant CTDIvol and DLP meet the clinical
goal for the acquisition and follow the radiation exposure
guidelines for your department.
Manual kV mode has been enabled.
Verify kV, Noise Index, Min mA/Max mA, or kV, Manual mA
19
values and resultant CTDIvol and DLP meet the clinical
goal for the acquisition and follow the radiation exposure
guidelines for your department.
Manual mA mode has been enabled. Verify the prescribed
mA and resultant CTDIvol and DLP meet the clinical goal
20
for the acquisition and follow the radiation exposure guide‐
lines for your department.
Prescribed NI cannot be achieved with selected scan pa‐
21
rameters.
SmartmA has been enabled. Verify the Noise Index, Min
mA/Max mA values and resultant CTDIvol and DLP meet
22
the clinical goal for the acquisition and follow the radiation
exposure guidelines for your department.
SmartmA with ODM has been enabled. Verify the Noise In‐
dex, Min mA/Max mA, ODM range and the resultant CTDI‐
23
vol and DLP meet the clinical goal for the acquisition and
follow the radiation exposure guidelines for your depart‐
ment.
24
Early Beat Avoidance disabled.
25
Irregular heart beats detected prior to scan.
Preparing to scan extremely high heart rate with highly ir‐
26
regular beats. Verify the heart rate is valid for clinical indi‐
cation.
Preparing to scan extremely high heart rate with irregular
27
beats. Verify the heart rate is valid for clinical indication.
Preparing to scan high heart rate with highly irregular
28
beats. Verify the heart rate is valid for clinical indication.
Preparing to scan intermediate heart rate with highly irregu‐
29
lar beats using narrow phase range. Verify that the acquisi‐
tion phase range is valid for clinical indication.
Preparing to scan intermediate heart rate with irregular
30
beats using narrow phase range. Verify that the acquisition
phase range is valid for clinical indication.
Preparing to scan with extremely high and variable heart
31
rate. Verify the heart rate is valid for clinical indication.
Preparing to scan with extremely high heart rate. Verify the
32
heart rate is valid for clinical indication.
Appendix A Operator Messages
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Translated Operator Message
671

Advertisement

Table of Contents
loading

Table of Contents