GE Revolution CT User Manual page 258

○
Clicking the
○
Clicking the
side or up and down simultaneously.
2. Click and drag the solid box to the start location.
NOTE: For Axial or Cardiac scan types, the position set is the full FOV location.
3. Click and drag the empty box to the end location.
NOTE: Press <Shift> and simultaneously click and drag either the solid or empty box to
adjust both the start and end locations at the same time.
4. Click and drag the diamond key to set the Display Field of View (DFOV) equally around the
center of the DFOV.
Alternatively, press <Shift> and simultaneously click and drag the diamond key to adjust the
DFOV and the R/L center or A/P center on the selected side.
Graphic Rx viewport, right-click and choose an option to show or hide the slices.
5. From the
○ Select [Cut Lines] to show a line for each image reconstructed.
○
Deselect [Cut Lines] to show a transparent area of coverage with no slice lines
displayed.
Graphic Rx viewport, right-click and deselect IEC to remove the indicators of the
6. From the
helical scan irradiated area.
○
For helical acquisitions, the full X-ray irradiated area is shown for all groups using a pair
of magenta lines that are the length of the SFOV.
○
For multiple groups, solid magenta lines are shown for the primary scan group selected.
Dashed magenta lines are shown for secondary scan groups.
258
X moves the slices in the slice direction only.
X and pressing <Shift> moves the slices in the slice direction and side-to-
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
3 Exam Workflow