GE Revolution CT User Manual page 162

Number
4
5
6
7
8
9
10
11
12
13
162
Button Function
Pause Scan
Stop Scan
Move to Scan
Stop Move
Cradle Home
Talk
Volume Control (auto‐
voice to gantry)
Volume Control (oper‐
ator to patient)
Volume Control (pa‐
tient to operator)
Power
Direction 5480385-1EN, Revision 1
Description
Pauses scanning, once the current scan is completed. You can
resume the scan by clicking [Resume] from the
screen.
Immediately stops the scan. You can resume the scan by click‐
ing [Resume] from the Scan Progress screen.
The indicator flashes green for three minutes, indicating that the
system is ready to advance the cradle to the start position.
Press Move to Scan to advance the cradle to the start location.
Stops cradle motion in/out. Click [Resume] from the
tings screen to resume the scan.
Moves the cradle to the home position.
Press Talk and speak towards the intercom to communicate with
the scan room.
The green LED (next to button) lights when Talk is pressed.
This dial controls the autovoice volume to the patient. An upward
adjustment of the dial increases the volume while a downward
adjustment of the dial decreases the volume. The dial has num‐
bers indicating what volume level you have set.
The green LED light flashes when autovoice is playing.
This dial controls the volume of the operator's voice to the pa‐
tient. An upward adjustment of the dial increases the volume
while a downward adjustment of the dial decreases the volume.
The dial has numbers indicating what volume level you have set.
This dial controls the volume of the patient's voice to the opera‐
tor. An upward adjustment of the dial increases the volume while
a downward adjustment of the dial decreases the volume. The
dial has numbers on it indicating what volume level you have
set.
Push the Power button to power up the scanner desktop.
The Power button is lit when the scanner desktop is on.
Revolution CT User Manual
Scan Progress
Scan Set‐
2 Scanner Desktop