Contrast Report; Set Up The Enhanced Xtream Injector - GE Revolution CT User Manual

4.3 Contrast report

An Enhanced Xtream Injector contrast report detailing the contrast agent used, injection phase,
delay, phase type, rate, volume and duration is automatically saved when you select [Done
Scanning]. The contrast report is saved as Series 996. It can be archived and transmitted over a
network. The values saved for rate, volume and duration are the actual values achieved by the
injector, not the prescribed values.
NOTE: Selecting [Done Scanning] before the Injection Complete message posted on the
injector may result in the Injector Report not being created.

4.4 Set up the Enhanced Xtream Injector

Before you start
•
A cable from the injector must be connected to the gantry.
Chapter 12 Scan Applications
Illustration 15: Enhanced Xtream Injector contrast report text page
NOTICE
Please refer to the Safety section for important safety information regarding the
use of the equipment and software on this system.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
329