Table of Contents
Advertisement
a. Enter the desired protocol name.
b. Select the protocol category from the drop-down menu.
c. Select the anatomy from the drop-down menu.
d. Click [OK] to save the new protocol.
Copy Forward
Copy Forward Patient Orientation, Patient Position and Anatomical Reference is a feature that
adjusts these three bundled parameters in a scanning protocol based on the values in the
previous series.
The Copy Forward feature can also be used to duplicate (reuse) the following parameters within
series from primary reconstruction to secondary reconstructions:
•
Start Location
•
End Location
•
Time Between Passes (Cine scan type only)
•
Interval (Helical scan type only)
•
DFOV
•
R/L Center
•
A/P Center
580
Illustration 2: Protocol Save window
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
2 Protocols
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated