Table of Contents
Advertisement
See
Section 2.5
displayed in the Exam list.
2.2.1.1 Exam status column
The first column of the Exam list shows icons representing the status of exams.
Table 3: Exam list status icons
This icon:
Indicates:
The exam is for the patient currently on the table.
To bring the exam tab to the front, click the icon or double-click the exam.
The exam is open in a tab, but the patient is not on the table. (For example, the patient scan is complete and
the patient is no longer on the table, but you are performing image processing tasks.)
To bring the exam tab to the front, click the icon or double-click the exam.
The exam is closed.
To open the exam, click the icon or double-click the exam.
The tab will show the scan task list and the dose report, and the current state of image processing. Images will
be displayed if assigned to a display viewport.
Image processing is not completed, but the tab for the exam is closed.
If the exam was aborted before image processing was complete, you can reopen the exam and continue with
image processing.
The exam is being pulled from a remote network host, a DVD, or USB media.
2.2.1.2 Network Status icons
The Network Status column shows the network state of exams.
Table 4: Network Status icons
This icon:
No icon
NOTE:
The icons change depending on the language used in the user interface.
Hovering over a network status icon displays a pop-up list showing the destinations to which the
exam was networked. The list is limited to 10 destinations.
510
for information about configuring, arranging, and resizing the columns
Indicates:
The exam has not been networked.
All series in the exam have been networked.
A network transfer is in progress for the exam.
There was an error when attempting to network the exam.
The icon displays if there is an error in transferring to any network location.
Click the icon to open the network queue manager.
The exam has been partially networked. (One or more series in the exam have been networked.)
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
2 File Manager
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated