Transfer Options - GE Revolution CT User Manual

3.1.4.4 Transfer options

The Transfer options allow you to send the completed reformats to network hosts or to a USB
drive. You can transfer a single series or task or multiple series and tasks or you can transfer
entire exams.
Each image series can be prescribed individually to transfer data to any network or archive host
after the image series has been fully created by clicking on the image series task bar to display
the settings for that task, and then opening the data transfer settings.
Table 5: Transfer options
For this setting:
Host name/USB boxes
Show Additional Hosts
Select the option corresponding to how you want to send the reformat. Select either
Complete or Images Reconstructed
The default is to send each series as reconstruction for it is complete. However, for exams that
take a long time to reconstruct, you can transfer each image as soon as it is reconstructed.
Transferring an exam
426
Illustration 12: Transfer options
Illustration 13: Transfer options — set transfer time
Direction 5480385-1EN, Revision 1
Select or set:
Select the hosts/USB devices to which you want to send the re‐
format when it is complete.
If you have other hosts to select, open to select it from this list.
3 Direct Multi Planar Reformat (DMPR)
Revolution CT User Manual
Series