Save Images - GE Revolution CT User Manual

•
Use a soft, lint-free cloth to remove spots, dust, or fingerprints from the disc. Always wipe
from the center to the outside edge of the disc. Do not wipe the disc in a circular motion.
• Do not use any chemical-based cleaners. These can damage the disc.
•
Do not use the CD/DVD/USB interchange program to permanently store your data. If the
CD/DVD/USB is damaged there is no recovery of the data.

5.3 Save Images

Use these steps to save images from your system to a CD, DVD or USB device.
You can record DICOM image data to either a blank, compatible CD/DVD that is placed in the
CD/DVD read/write external drive or to a USB device inserted into one of the USB ports. If
saving to CD/DVD, once you close the drawer with the CD/DVD in it, wait until the CD/DVD
drive light turns off. This is an indication that the CD-R or DVD-R is spinning up to speed.
•
Data on a CD-R, DVD-R and USB can be recorded only in a single session. All image data
that you want to record must be selected beforehand. The data will be recorded in a single
pass. It is not possible to add data on a CD-R, DVD-R or USB.
•
Image data can also be recorded in Portable Document Format (PDF) or HTML format by
using the Data Export function.
•
You cannot load images on a USB device that already has data stored on it. If you attempt
this, the system informs you that if you continue, it will erase the data from the USB device.
It is advisable to use only USB devices that have no data on them.
•
Do not connect two USB devices at the same time for save/restore of scan data.
• The following information will be displayed for CT images: Hospital Name, Patient Name,
Date of Birth, Acquisition Date, Exam/Series/Image information, Anatomical Reference,
Slice Location, DFOV, Recon Algorithm, Series Description, kV, mA Noise Index Values,
Pitch, Rotation Time, Tilt, Slice Thickness, Scan Time of Day, RAS coordinates, and
WW/WL values.
1. Insert the media to which you want to copy.
2.
From File Manager, click the [Media Creator] icon
3. From the Media Creator window, select the media type from the Media menu.
If you opened the Media Creator window before you inserted a device into a drive, click the
Refresh icon
Chapter 17 Data Management
NOTICE
Please refer to the Safety section for important safety information regarding the
use of the equipment and software on this system.
to update the Select Media menu.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
.
535