Set The Voice/Lights/Timer Options; Change The Auto Voice Preset Delay - GE Revolution CT User Manual

7.3 Set the Voice/Lights/Timer options

Use this procedure to set the Voice/Light/Timer settings so the system will automatically give
breathing instructions to the patient based on the applied settings.
The Light and Timer features are visible on the gantry if selected for use.
Scan Settings window, click the Timing collection.
1. From the
Voice, Lights, Timer .
2. Click
3. Select the commands you want to use for breathing instructions.
○
Three pre-recorded voices are available in ten languages.
○ You can record additional voice instructions. See
○
You can set an Auto Voice preset delay.
Breathing Lights .
4. Turn on
Breathing Lights does not require that the voice is selected.
NOTE:
Timer , if desired.
5. Turn on
Timer does not require that Breathing Lights are on.
NOTE:
6. Click [OK].

7.4 Change the Auto Voice preset delay

The Preset Delay adds a delay between the completion of the Pre-scan message and X-ray on.
This delay can be set when creating a protocol. Use this procedure to set the preset delay.
Scan Settings window, click the Timing collection.
1. From the
Voice, Lights, Timer .
2. Click
Preset Delay Time field, enter a time.
3. In the
The valid range is 0 to 7 seconds.
4. Click [OK].
302
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Record an Auto Voice message .
7 Auto Voice