New And Completed Records; Add A Patient To The Schedule - GE Revolution CT User Manual

Element
Preferences
Delete All Completed

2.2 New and completed records

Patient Schedule incudes a column labeled
next to each patient entry.
•
N indicates the record is incomplete or is a new record. These are records for patient studies
that are scheduled in Patient Schedule, but are not yet completed.
•
C indicates the record is completed.
NOTE: When accessing patient information from the HIS/RIS you should have only new
records in your schedule list. Having completed records may cause scanning a patient
with the wrong accession number. To clear completed records; select
from the
Configuation UI . Uncheck the Show Completed WL box . This setting assures that
completed records are not added to the schedule list.

2.3 Add a patient to the Schedule

To manually add a patient to the Patient Schedule, follow these steps:
1. Click the Plus icon
in the upper left of the left monitor. , or
From the scan monitor, click the
Schedule dropdown menu in the top right corner of the window.
2. Complete all relevant fields on the
3.3.2, Set up the patient's information
Chapter 10 Patient Schedule
Schedule dropdown menu. Then select Scheduler Configuration UI and
Illustration 4: Show Completed WL
Patient Schedule drawer. Then select Add Patient from the
Patient Information window. Refer to
Description
Allows you to set up a connection to a HIS/RIS.
Delete all completed exams from the Schedule.
Status . In the Status column, an N or a C is listed
in the Scan chapter for more information.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Preferences
Chapter 11, Section
207