4.3 Add a grid
Use these procedures to place a grid (matrix) over the primary image to measure anatomy or
pathology on an image.
1. From the viewport control panel, click the arrow next to
[Grid]
2. Click and drag the center point of the grid to move it.
3. To remove the grid, click the [Grid] icon again.
4.4 Measure distance
Use these procedures to activate a measure tool to obtain information, distances, and areas of
anatomy or pathology. Multiple measurements can be added to the image, but only up to three
measurement statistics can be displayed on a single image.
1. From the viewport control panel, click the arrow next to
396
Illustration 15: MIROI graph
icon.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Measure/Annotate , then click the
Measure/Annotate .
4 Measurements