GE Revolution CT User Manual page 537

8.
Click the Copy icon
○
Do not begin recording until all desired series have been added to the list. You cannot
record more data to the CD-R or DVD-R once you have started the recording process.
○
The progress bar (1) and message bar (2) displays messages indicate the progression
of the copy activity.
○
Error prompts may appear if the media is damaged, if the media is not blank or the files
are too large for a single media, etc.
○
The progress bar displays 100% and a message appears in the message area when
recording is completed.
○
Very large data sets can take a very long time (more than one hour) to copy to CD. If
you change your mind about copying the files to CD/DVD, you can quit copying and start
it over at a time more convenient. Click [Quit] to cancel the copy process and upon
clicking [OK] to the confirmation prompt, the copy process is stopped and the Media
Creator window closes. An alternative is to click [Cancel].
9.
Once the recording is finished, click the Quit icon
○ If you click Quit before the save process has completed, a confirmation prompt appears.
If you confirm the Quit, then the save process is canceled.
○
The Stop icon
10.
From File Manager, click the Media Creator icon
View the progress bar to note if the burning process is finished.
Chapter 17 Data Management
to start the recording process.
Illustration 28: Progress Bar and Message Area
stops burning data.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
.
.
537