Table of Contents
Advertisement
3. Click [Select Patient].
When the patient record opens, only the description of the last exam selected displays. The
system stores the others and they will be available during the split.
NOTE:
If multiple accession numbers are selected, the last accession number selected is
listed in the images header. The accession number is stored in a different DICOM
field (0040, 0275) when multiple records are selected. Use
to the PACS with the associated accession number for a particular procedure.
4.3 Split exams when the scan is completed
Use this procedure to split a series into separate groups that can then be used for multiple
reads and billing.
1. Complete an exam where multiple Requested Procedure ID or Accession Numbers have
been selected.
All Patient records that you wish to split, must be selected from the
you selected [New Patient]. You cannot add procedures after the exam is ended.
2. In File Manager, highlight the exam you want to work with, right click and select [Exam Split]
Exam Split window. Alternatively, highlight the series you want to work with, right
to open the
click and select [Open with], then [Exam Split].
Chapter 15 Display Applications
Illustration 19: Patient Schedule with exams selected for split
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Exam Split to send images
Patient Schedule when
435
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated