Table of Contents
Advertisement
Chapter 1 User Information
1 Introduction
Anyone who operates this system should have received prior training before they attempt to
scan patients. This training should include medical and X-ray education, If necessary, additional
training is available from a GE Applications Specialist. Contact your institution's GE Healthcare
sales representative for additional information about further safety and operational training. This
manual does not provide medical explanations, but it does suggest potential applications for
some of the software features. It describes potential safety problems and how to avoid them.
Everyone who uses this equipment must read and understand all instructions, precautions and
warnings. Procedures and safety precautions described in the Safety chapter should be read
periodically.
Only designated persons (service personnel) are to install this system. They are to refer to the
proper pre-installation and installation manuals when installing the system.
Only designated persons are to perform service on this system. They are to refer to the proper
service manuals when servicing this system.
Do not use the equipment if a known safety problem exists. Call your local service provider and
have the system repaired.
Chapter 1 User Information
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
37
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated