GE Revolution CT User Manual page 610

○
If you use LDAP authentication without SSL, passwords are not sent securely. This is
not recommended. An alert is posted for this configuration. With Kerberos and non-SSL,
the authentication is encrypted, but the LDAP traffic is not.
5. Click [Test Connection] to test if the machine can connect to the enterprise directory server.
○ If the connection is successful, CONNECTION OK is displayed next to [Test Connection].
○
If the connection is unsuccessful, CONNECTION BAD is displayed next to [Test
Connection]. This indicates there is a problem connecting to the enterprise directory
server.
Check the following:
■
Server Name/IP
■
If the system has DNS running.
■ If the system can resolve the Server Name/IP.
Test Connection is successful, select the Server Type for the enterprise directory
6. Once the
server (Microsoft Active Directory, Novell eDirectory, et cetera).
7. Click [Generate Defaults] to populate the
Name Attribute , Last Name Attribute , and Group Attribute fields with default values for the
enterprise directory server type.
○ If the enterprise directory type is MSAD, both the
populated.
○
If the enterprise directory type is eDirectory, the
configuring an enterprise directory server that is not MSAD or Novell eDirectory, the
configuration must be done manually. Get the correct LDAP property information from
the owner of the enterprise directory server.
○
If this is a non-MSAD, non-eDirectory server, or is a server with a non-default
configuration, manually change properties, as needed.
8. Enter a Username and Password for a user that resides on the enterprise directory server.
9. Click [Login] to see if the login is successful.
○ First Name , Last Name , and any Group Memberships for the user are displayed. If
The
First Name , Last Name , or Group Memberships are not found, a warning is posted
indicating:
■
The LDAP properties are not configured correctly (
Attribute , and/or Group Attribute ).
■
The user does not have a
configured on the enterprise directory server.
○
If you get these warnings, contact the owner of the enterprise directory server to verify it
is configured properly.
610
Realm Name , Format , DN , Login Attribute , First
Realm Name and the DN are
Realm Name is left blank. If you are
First Name , Last Name , or any Group Memberships
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
First Name Attribute , Last Name
2 Access Controls