My Tools Tab; View Tools - GE Revolution CT User Manual

Icon
Rotate/Translate
Integrated Registration
Link/Unlink
Cine
MPR/3D
Display Options

3.6 My Tools tab

Reformat and then click [My Tools] to view the My Tools tab. My Tools palette is a
Open
customizable tools palette, where you can place the most frequently used tools. It is
recommended to group the tools together so they are easily accessed. Unlike the other tabs,
this tab cannot be hidden. See the Display tab for a description of the available tools.

3.6.1 View Tools

•
Click [More Tools] to switch to an Advanced mode, where you have access to all the tools
grouped under tabs.
• Click [Display Less Tools] to switch to the Basic mode, where some tools are stacked.
Chapter 16 Reformat
Description
Opens the Rotate/Translate control panel, which you can set rotation by degree and direction and transla‐
tion by distance.
Integrated Registration is not supported on the CT console.
Opens the Link/Unlink control panel, which allows you to unlink multiple volumes to allow manual registra‐
tion adjustment.
Opens the Cine control panel, which allows you to automatically page through all of the slices of a single
phase series or control a 4D Cine of multiphase series.
Opens the MPR/3D control panel, which guides you through the creation of 3D or multiplanar image
views. From this panel you can adjust slab thickness and select render modes such as MIP, Average,
MinIP, and Volume Rendering.
Opens the Display Options panel, which allows you to set display preferences for viewed images.
Illustration 6: My Tools tab
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
455