Multi-Planar Formats And 3D Processing; Service And Application Tools - GE Revolution CT User Manual

Generic description
Scan delay: Time from when threshold is reached and prescribed
axial, helical or dynamic scan begins (Time 3 in figure below)

1.6 Multi-planar formats and 3D processing

Table 6: Multi-planar formats and 3D processing terms
Generic description
Reformatted image at an oblique plane (not an axial, coronal, or
sagittal)
Saving images at various viewing angles about a volume or sur‐
face rendered object
Saving images at various planes through a volume
Surface-rendered object
Volume-rendered object

1.7 Service and application tools

Table 7: Service and application tool terms
Generic description
X-ray tube warm up
Daily calibrations
Application information
Application support assistance
686
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
GE name
Diagnostic delay
GE name
Oblique reformat
Batch Loop
Batch Reformat
3D
Volume Rendered image
(VR)
GE name
Tube Warm-up (tube
warm up)
Fast Cals (done in daily
prep)
Learning Solutions or User
Manual
Insite or Ilinq
1 Lexicon