Table of Contents
Advertisement
Illustration 3: Labels on the front of gantry, rear of table, back of PDU, back of Scanner
3.2.2 X-ray Warning Labels
Illustration 4: Label located on Scan Control Interface (Reference 21CFR 1020.30 (j))
3.2.3 Table Warning Labels
Chapter 3 Safety
Desktop, and side of System Cabinet.
CAUTION
Avoid Injury. Read and understand information in manuals before operating
product.
WARNING
THIS X-RAY UNIT MAY BE DANGEROUS TO PATIENT AND OPERATOR
UNLESS SAFE EXPOSURE FACTORS, OPERATING INSTRUCTIONS AND
MAINTENANCE SCHEDULES ARE OBSERVED.
TO BE USED BY AUTHORIZED PERSONNEL ONLY.
Illustration 5: Pinch warning label located on the table
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
53
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated