Table of Contents
Advertisement
13 Data Safety
Chapter 3 Safety
CAUTION
Incorrect data entries or procedures could result in misinterpretation or
misdiagnosis.
WARNING
SYSTEM DISK SPACE IS LOW. PLEASE PERFORM A SYSTEM RESTART
FROM THE MODE MENU. IF PROBLEM PERSISTS, CONTACT YOUR
SERVICE REPRESENTATIVE.
WARNING
SCAN DATA STORAGE SPACE IS GETTING LOW. PLEASE FINISH ACTIVE
RECONSTRUCTIONS AND UNRESERVE OBSOLETE SCAN DATA .
WARNING
DO NOT LOAD ANY NON-GE APPROVED SOFTWARE ONTO THE
COMPUTER.
WARNING
THE SYSTEM POSTS A WARNING MESSAGE IF THERE IS A FAILURE
DURING THE ARCHIVE OF PATIENT DATA.
WARNING
THE SYSTEM POSTS A WARNING MESSAGE IF THERE IS A FAILURE
DURING THE NETWORK TRANSFER OF PATIENT IMAGE DATA.
WARNING
LOW IMAGE SPACE. PLEASE REMOVE IMAGES AND EMPTY THE
RECYCLE BIN.
WARNING
MISSING SLICES HAVE BEEN INTERPOLATED TO MAKE REFORMATTED
IMAGES.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
81
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Revolution CT and is the answer not in the manual?
Questions and answers
need a part number for the Integrated Cardiac Patient Monitor, patient grounding strap + cable
How do I clear Ge Revolution collision sensor
To clear the collision sensor on a GE Revolution CT, remove any obstructions detected by the sensors located beneath the front and back of the table. Once the area is clear, you can continue positioning the table.
This answer is automatically generated