Add Memberships; Group Restricted Fields - GE Revolution CT User Manual

1. Section 2.4, Open
Groups tab, click [Add Local Group].
2. From the
Add Local Group window, type a unique Group Name .
3. From the
If an error occurs a message displays, and the changes are not applied in the database.
Correct the errors and try again.
Common errors include:
Group Name already exists in the database. Try another Group Name .
○
○
Application session timed out. Begin another session.
4. Click [Add Group].
The group is highlighted in the
center panel apply to the highlighted group.
5. To change a group's role, select a
○
A green label confirms the applied roles.
○
An error message displays if it is unsuccessful.

2.7.1 Add memberships

1. Section 2.4, Open
Groups tab, select a group in the Local Groups area.
2. From the
Group Members area, click [Add Membership].
3. From the
A panel lists all the users that are eligible to be added to the selected group.
4. Select the users to add to the group.
If no users are eligible to be added to the group, an error message displays.
5. Click [Add To Group].

2.7.2 Group Restricted Fields

Some text fields and buttons on the
The following roles, users or groups have one or more of these criteria, and cannot be modified.
Chapter 19 Access Controls
EA3.
Illustration 4: Add Local Group Window
Local Groups list area. All selections and buttons in the
Roles option and click [Apply Roles].
EA3.
Groups tab are not selectable under the certain conditions.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
599