Operating Elements; Service Interface; Figure 27: Service Interface (Closed And Opened Flap); Table 16: Legend For Figure "Service Interface (Closed And Opened Flap) - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
4.4

Operating Elements

4.4.1

Service Interface

The service interface is located behind the flap.
It is used for the communication with WAGO-I/O-CHECK, WAGO-I/O-PRO and
for update the firmware.

Figure 27: Service Interface (Closed and Opened Flap)

Table 16: Legend for Figure "Service Interface (Closed and Opened Flap)"

Number
1
2
Device must be de-energized!
To prevent damage to the device, unplug and plug in the communication cable
only when the device is de-energized!
The connection to the 4-pin header under the cover flap can be realized via the
communication cables with the item numbers750-920 and 750-923 or via the
WAGO radio adapter with the item number 750-921.
Description
Open closed flap
View Service Interface
Device Description
Manual
1.5.0
55