Connectors; Network Connectors; Service Interface; Supply Voltage - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
4.1.3

Connectors

4.1.3.1

Network Connectors

Table 5: Network Connections ETHERNET – "X1", "X2"
Contact
1
2
3
4
5
6
7
8
4.1.3.2

Service Interface

The service interface „X3" is used for the communication with WAGO Ethernet
Settings.
The USB service interface is designed as a USB-C socket. The interface
supports USB Specification 2.0.
The controller appears on the host device (PC) as a peripheral device in device
mode.
4.1.3.3

Supply voltage

Table 6: Supply Voltage – "X4"
Contact
1
2
4.1.3.4

Digital inputs and outputs

The connectors are for connecting actuators and sensors.
picoMAX
®

4.1.3.4.1 Digital inputs

The controller receives binary control signals from digital field devices (e.g.,
sensors, encoders, switches or proximity switches).
The product has 8 input channels (8DI, 24 VDC, 2.8 mA).
Each input channel has a noise-rejection RC filter with a 5.0 µs time constant.
Signal
TD +
TD −
RD +
NC
NC
RD −
NC
NC
Signal
U +
S
GND
plugs with push-in CAGE CLAMP
Version 1.1.0, valid from FW Version 03.08.07(20)
Description
Transmit Data +
Transmit Data −
Receive Data +
Not assigned
Not assigned
Receive Data −
Not assigned
Not assigned
Description
Supply voltage
Ground
S connections are used.
®
Properties 27
Manual