Table of Contents
Advertisement
20
Important Notes
Pos : 17 /All e Seri en (Allgemei ne Module)/Wic htige Erläuterungen/Spezi elle Einsatzbesti mmung en für ETH ERN ET-Ger äte @ 12\mod_1336642945500_21.doc x @ 94792 @ 2 @ 1
2.3
Special Use Conditions for ETHERNET Devices
If not otherwise specified, ETHERNET devices are intended for use on local
networks. Please note the following when using ETHERNET devices in your
system:
•
Do not connect control components and control networks to an open
network such as the Internet or an office network. WAGO recommends
putting control components and control networks behind a firewall.
•
Limit physical and electronic access to all automation components to
authorized personnel only.
•
Change the default passwords before first use! This will reduce the risk of
unauthorized access to your system.
•
Regularly change the passwords used! This will reduce the risk of
unauthorized access to your system.
•
If remote access to control components and control networks is required,
use a Virtual Private Network (VPN).
•
Regularly perform threat analyses. You can check whether the measures
taken meet your security requirements.
•
Use "defense-in-depth" mechanisms in your system's security configuration
to restrict the access to and control of individual products and networks.
Pos : 18 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-I/O-SYSTEM 750
750-871 ETHERNET TCP/IP 2-port Controller
Manual
Version 1.3.0
Advertisement
Table of Contents
