Removing Web-Based Authentication Cache Entries; Monitoring Web-Based Authentication Status - Cisco Catalyst 2960-X Security Configuration Manual

Configuring Web-Based Authentication

Removing Web-Based Authentication Cache Entries

Follow these steps to remove web-based authentication cache entries:
SUMMARY STEPS
1. enable
2. clear ip auth-proxy cache {* | host ip address}
3. clear ip admission cache {* | host ip address}
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch> enable
Step 2 clear ip auth-proxy cache {* | host ip address}
Example:
Switch# clear ip auth-proxy cache
192.168.4.5
Step 3
clear ip admission cache {* | host ip address}
Example:
Switch# clear ip admission cache 192.168.4.5

Monitoring Web-Based Authentication Status

Use the commands in this topic to display the web-based authentication settings for all interfaces or for specific
ports.
Table 31: Privileged EXEC show Commands
Command
show authentication sessions method webauth
OL-29048-01
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Delete authentication proxy entries. Use an asterisk to delete all
cache entries. Enter a specific IP address to delete the entry for
a single host.
Delete authentication proxy entries. Use an asterisk to delete all
cache entries. Enter a specific IP address to delete the entry for
a single host.
Purpose
Displays the web-based authentication settings for all
interfaces for fastethernet, gigabitethernet, or
tengigabitethernet
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Removing Web-Based Authentication Cache Entries
387