Configuring Web-Based Authentication
Command or Action
Step 2
clear ip admission cache {* | host ip address}
Example:
Switch# clear ip admission cache 192.168.4.5
Monitoring Web-Based Authentication Status
Use the commands in this topic to display the web-based authentication settings for all interfaces or for specific
ports.
Table 29: Privileged EXEC show Commands
Command
show authentication sessions method webauth
show authentication sessions interface
type slot/port[details]
OL-29434-01
Purpose
Delete authentication proxy entries. Use an asterisk to delete all
cache entries. Enter a specific IP address to delete the entry for
a single host.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
Monitoring Web-Based Authentication Status
Purpose
Displays the web-based authentication settings for all
interfaces for fastethernet, gigabitethernet, or
tengigabitethernet
Displays the web-based authentication settings for
the specified interface for fastethernet, gigabitethernet,
or tengigabitethernet.
In Session Aware Networking mode, use the show
access-session interface command.
323