Displaying Lldp Neighbors Information - Cisco 200 Series Administration Manual

Configuring Discovery
Configuring LLDP
STEP 1
STEP 2
Cisco Small Business 200 Series Smart Switch Administration Guide
• DSCP—Network policy DSCP.

Displaying LLDP Neighbors Information

LLDP Neighbors Information Page
The
using the LLDP protocol from neighboring devices.
After timeout (based on the value received from the neighbor Time To Live TLV
during which no LLDP PDU was received from a neighbor), the information is
deleted.
To view the LLDP neighbors information:
Click Administration > Discovery - LLDP > Neighbors Information. The
Neighbors Information Page
This page displays the following fields:
• Local Port—Number of the local port to which the neighbor is connected.
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of the 802 LAN neighboring device's chassis.
• Port ID Subtype—Type of the port identifier that is shown.
• Port ID—Identifier of port.
• System Name—Published name of the switch.
• Time to Live—Time interval (in seconds) after which the information for this
neighbor is deleted.
Select a local port, and click Details. The
This page displays the following fields:
Port Details
• Local Port—Port number.
• MSAP Entry—Device Media Service Access Point (MSAP) entry number.
Basic Details
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
displays information that was received
opens.
Neighbors Information Page
7
LLDP
opens.
71